KIENINGER TRIPLE CHIME MOVEMENT KSU 79 - 100CM PENDULUM

Kieninger KSU 79 cable-driven three weight movement geared for 100 cm pendulum.  The movement right selector supports triple-chimes (12 rear hammers in an 8x4 configuration):  Westminster,...

KIENINGER TRIPLE CHIME MOVEMENT KSU 80 - 93CM PENDULUM

Kieninger KSU 80 cable-driven three weight movement geared for 93 cm pendulum.  The movement right selector supports triple-chimes (12 rear hammers in an 8x4 configuration):  Westminster,...

KIENINGER TRIPLE CHIME MOVEMENT MSU 05 - 93CM PENDULUM

Kieninger MSU 05 cable-driven three weight movement geared for 93 cm pendulum.  The movement right selector supports triple-chimes (12 rear hammers in an 8x4 configuration):  Westminster,...

KIENINGER TRIPLE CHIME MOVEMENT MSU 13 - 116CM PENDULUM

Kieninger MSU 13 cable-driven three weight movement geared for 116 cm pendulum.  The movement right selector supports triple-chimes (12 rear hammers in an 8x4 configuration):  Westminster,...

KIENINGER TRIPLE CHIME MOVEMENT SEW01 - ESCAPEMENT

Kieninger SEW 01 1/4 key wind movement with 5 jewel escapement (no pendulum). The movement right selector supports triple-chimes (8 bottom hammers):  Westminster, St. Michael, and Whittington...

KIENINGER TRIPLE CHIME SEQUENTIAL MOVEMENT KSU 50 - 116CM PENDULUM

Kieninger KSU 50 cable-driven three weight movement geared for 116 cm pendulum.  The movement supports an automatic chime sequence where each hour the chime changes.   The movement...

KIENINGER TRIPLE CHIME SEQUENTIAL MOVEMENT KSU 51 - 93CM PENDULUM

Kieninger KSU 51 cable-driven three weight movement geared for 93 cm pendulum.  The movement supports an automatic chime sequence where each hour the chime changes.   The movement...

KIENINGER TUBULAR BELL HAMMER ASSEMBLY

Kieninger tubular bell hammer assembly includes the brass hammer head, hammer spring, and string. Overall length from brass head to spring end:  6 7/16"L. Spring width at widest point: 3/8"W...

KIENINGER TUBULAR BELL HAMMER SPRING

Kieninger tubular bell hammer spring only. Overall length from tip to tip:  7 7/8"L. Spring width: 3/8"W. Sold individually. Made in Germany.

KIENINGER TUBULAR BELL HANGING CLIP

A single Kieninger tubular bell hanging clip. Use these clips to attach the tube to the movement rack. Size:  1 5/16" outside width. Made in Germany.  

KIENINGER WEIGHT HOOK AND NIB (M4)

Kieninger brass weight hook and nib. Select from hook or nib for M4 weight rods. Sold individually.  WARNING: This product may contain lead and lead is on the California Proposition...

KIENINGER WEIGHT PULLEY

Genuine Kieninger pulley. Diameter: 1 3/4" (45mm). Sold individually. For Kieninger movements: KS, KSU, HTU, HS, HSU, MS, and MSU. Made in Germany.

KIENINGER WESTMINSTER CHIME MOVEMENT HO 01 - 116CM PENDULUM

Kieninger HO 01 chain-driven three weight movement geared for 116 cm pendulum. The movement strikes the 1/4 hour. The movement right selector supports Westminster chime (8 rear hammers in an 4x4...

KIENINGER WESTMINSTER CHIME MOVEMENT MS 008 - 116CM PENDULUM

Kieninger MS 008 cable-driven three weight movement geared for 116 cm pendulum.  The movement right selector supports Westminster (8 rear hammers in an 4x4 configuration) or silent.  The...

KIENINGER WESTMINSTER CHIME MOVEMENT MS 009 - 93CM PENDULUM

Kieninger MS 009 cable-driven three weight movement geared for 93 cm pendulum.  The movement right selector supports Westminster (8 rear hammers in an 4x4 configuration) or silent.  The...

KIENINGER WESTMINSTER CHIME MOVEMENT SKS-15 - 116CM PENDULUM

Kieninger SKS 15 chain-driven three weight movement geared for 116 cm pendulum.  The movement right selector supports 1/4 Westminster chime (5 side hammers) chime shutoff and ANSO. The night...

MASON AND SULLIVAN 3314X (KIENINGER RWS-4) CLOCK KIT WITH ARABIC DIAL

This is a rare find of a Mason and Sullivan Kieninger 3314X RWS-4 clock kit that is New Old Stock (NOS).  Mason and Sullivan were well known for high quality clock kits.  The movement is a...

PENDULUM KIENINGER R/A 10"L POLISHED BRASS

Heavy polished brass Kieninger pendulum with R/A Bob (3.4 ounces). Rod tip-to-tip length: 10". Polished Brass Bob: 1 7/8" diameter. Includes hook and rating nut.  WARNING: This product may...

PENDULUM LEADER WITH POST FINGER

Pendulum leader. Size: 7 1/8" (180mm)L. Top split hook for the suspension spring pins.  There is a slot for the post with a riveted finger.  The bottom has a rectangle hole for the pendulum...

POLISHED BRASS BEZEL 8 1/16" (205MM) NO GLASS

Polished brass bezel with no glass or hinge.  The front slopes to the inside diameter.  Used by Kieninger for the RWS movement. Diameter: 8 1/16" (205mm) O.D. Diameter:  7 3/16"...

WATERBURY PULLEY

Waterbury adjustable pulley. Diameter: 1". Sold individually.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects...

WEIGHT CORE INSERT 1500 GRAMS (3.2 LB.) 35 X 217MM

Weight core insert 1500 grams (3.2 lbs.) cast iron.  Each weight core insert half is 1.6 lbs. for a total of 3.2 lbs.  Requires a rod with female hook and nib, not included...

WEIGHT CORE INSERT 3000 GRAMS (6.2 LB.) FITS 40MM SHELLS

Weight core insert 3000 grams (6 lb. 6 ounces) lead with hole through.  Requires a rod with female hook and nib, not included.   Core size:  39mm (1.5") diameter x 230mm (9") L...

WEIGHT CORE INSERT 3000 GRAMS (6.6 LB.) FITS 60MM (2 3/8") OR 50MM (1.968") SHELLS

Weight core insert 3000 grams (6 lb. 9.3 ounces) cast iron.  Each weight core insert half is 1500 grams for a total of 3000 grams.  Requires a rod with female hook and nib, not included...

WEIGHT CORE INSERT 4700 GRAMS (10.4 LB.) FITS 60MM (2 1/4") SHELLS

Weight core insert 4,700 grams (10.4 lb.).  Internally threaded on both ends for hook and nib, not included.  Weight core is not drilled through and therefore does not require a center rod...

WEIGHT SHELL 50 X 160MM SOLID BRASS - GERMAN

Single Kieninger polished solid heavy brass weight shell.  The weight shells are used on the Kieninger PK chain driven bell strike and PS cable driven spiral gong cable/spring driven movements...

WEIGHT SHELL 50 X 195MM SOLID BRASS - GERMAN

Single Kieninger polished solid heavy brass weight shell.  The weight shells are used on the Kieninger PS cable driven Bim-Bam Strike and RWS cable/spring driven movements...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR KIENINGER SKS WITH LYRE PENDULUM

Set of 3 weight assemblies (47 x 272mm) for Kieninger SKS chain movements that utilize a lyre pendulum with 8.5" or 10.5" bob.  Polished brass finish (anodized aluminum) weight shells...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR KSU WITH LYRE PENDULUM

Set of 3 weight assemblies (60 x 245mm) for Kieninger KSU/MSU cable movements that utilize a lyre pendulum with 8.5" or 10.5" diameter bob.  Polished brass finish weight shells (anodized...

WEIGHT SHELL POLISHED BRASS FINISH 60 X 245MM - KSU SINGLE

Single weight shell is 60 x 245mm O.D. size for Kieninger KSU and MSU cable and chain movements. The shell has a polished brass finish (anodized aluminum).  The single shell includes: 1...