Quick view Herschede sku: MS WINDER XL-2 CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare
Quick view sku: OBCLAMPS OLLIE BAKER MAINSPRING SLEEVE CLAMPS MSRP: Now: $3.00 Choose Options Compare Quick view sku: MSWH-400 OLLIE BAKER MAINSPRING TOOL SMALL HANDLE MSRP: Now: $11.00 Add to Cart Compare Quick view sku: MSWH-478 OLLIE BAKER MAINSPRING TOOL LARGE HANDLE MSRP: Now: $12.50 Add to Cart Compare Quick view sku: MSW-2525 OLLIE BAKER MAINSPRING 25.25MM SLEEVE MSRP: Now: $22.00 Add to Cart Compare Quick view sku: MSWK-1 OLLIE BAKER MAINSPRING STAR KNOB MSRP: Now: $8.75 Add to Cart Compare Quick view sku: MSW-26 OLLIE BAKER MAINSPRING 26MM SLEEVE MSRP: Now: $20.00 Add to Cart Compare Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSWH-400 OLLIE BAKER MAINSPRING TOOL SMALL HANDLE MSRP: Now: $11.00 Add to Cart Compare Quick view sku: MSWH-478 OLLIE BAKER MAINSPRING TOOL LARGE HANDLE MSRP: Now: $12.50 Add to Cart Compare Quick view sku: MSW-2525 OLLIE BAKER MAINSPRING 25.25MM SLEEVE MSRP: Now: $22.00 Add to Cart Compare Quick view sku: MSWK-1 OLLIE BAKER MAINSPRING STAR KNOB MSRP: Now: $8.75 Add to Cart Compare Quick view sku: MSW-26 OLLIE BAKER MAINSPRING 26MM SLEEVE MSRP: Now: $20.00 Add to Cart Compare Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSWH-478 OLLIE BAKER MAINSPRING TOOL LARGE HANDLE MSRP: Now: $12.50 Add to Cart Compare Quick view sku: MSW-2525 OLLIE BAKER MAINSPRING 25.25MM SLEEVE MSRP: Now: $22.00 Add to Cart Compare Quick view sku: MSWK-1 OLLIE BAKER MAINSPRING STAR KNOB MSRP: Now: $8.75 Add to Cart Compare Quick view sku: MSW-26 OLLIE BAKER MAINSPRING 26MM SLEEVE MSRP: Now: $20.00 Add to Cart Compare Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSW-2525 OLLIE BAKER MAINSPRING 25.25MM SLEEVE MSRP: Now: $22.00 Add to Cart Compare Quick view sku: MSWK-1 OLLIE BAKER MAINSPRING STAR KNOB MSRP: Now: $8.75 Add to Cart Compare Quick view sku: MSW-26 OLLIE BAKER MAINSPRING 26MM SLEEVE MSRP: Now: $20.00 Add to Cart Compare Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSWK-1 OLLIE BAKER MAINSPRING STAR KNOB MSRP: Now: $8.75 Add to Cart Compare Quick view sku: MSW-26 OLLIE BAKER MAINSPRING 26MM SLEEVE MSRP: Now: $20.00 Add to Cart Compare Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSW-26 OLLIE BAKER MAINSPRING 26MM SLEEVE MSRP: Now: $20.00 Add to Cart Compare Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSW-532 OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW MSRP: Now: $3.25 Add to Cart Compare Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSW-11 MAINSPRING RETAINER SLEEVE SET - 11 PIECES MSRP: Now: $154.00 Add to Cart Compare Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: MSW-2 OLLIE BAKER MAINSPRING WINDER ADAPTER MSRP: Now: $75.00 Add to Cart Compare Quick view sku: CLAMPS MAINSPRING CLAMPS MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view sku: 24.752 LOOP END MAINSPRING WINDER MSRP: Now: $9.75 Add to Cart Compare Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view CLOCK MAINSPRING WINDER - PROFESSIONAL GRADE High quality clock mainspring winder for the serious repairer or professional. This next generation mainspring winder is a little larger and stronger than the Ollie Baker winder and is designed to support standard size springs as well as fusee and... MSRP: Was: Now: $7.75 - $710.00 Choose Options Compare
Quick view OLLIE BAKER MAINSPRING SLEEVE CLAMPS O-ring sleeve clamps used on Ollie Baker Mainspring sleeve. Select from SKU: MSW-024: #24 (27/51mm diameter) or SKU: MSW-028: #28 (33/57mm diameter) clamp sizes. MSRP: Now: $3.00 Choose Options Compare Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING TOOL SMALL HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4". 3/8" screw peg. MSRP: Now: $11.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING TOOL LARGE HANDLE Genuine Ollie Baker Mainspring Tool Large Plastic Handle. Overall length: 4 7/8". 3/8" screw peg. Largest handle diameter at end: 1 1/8". MSRP: Now: $12.50 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING 25.25MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Size: 25.25mm I.D. (inside diameter) x 26.5mm high. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other... MSRP: Now: $22.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING STAR KNOB Genuine Ollie Baker Mainspring Winder Tool Plastic Knob. Size: 1 3/16" diameter with 1" thread length. 1/4" x 20 thread. MSRP: Now: $8.75 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING 26MM SLEEVE Genuine Ollie Baker Mainspring Tool Sleeve. Sleeve size: 26mm I.D. x 1.5" H. WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm... MSRP: Now: $20.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING TOOL HEX HEAD SCREW Genuine Ollie Baker Mainspring Tool hex head screw. Size: 5/32" hex head with 1" L thread. Black screw. Sold individually. MSRP: Now: $3.25 Add to Cart Compare Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view MAINSPRING RETAINER SLEEVE SET - 11 PIECES High quality 11 retainer sleeve set for mainspring winder application. Sleeves have beveled leading edges and of high quality steel. American made by HAZ Laboratories. The set of retainer sleeves supports small french spring sizes to large... MSRP: Now: $154.00 Add to Cart Compare Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view OLLIE BAKER MAINSPRING WINDER ADAPTER Works with Ollie Baker Mainspring Winder (MSW-1) to clamp barrels into winder. MSRP: Now: $75.00 Add to Cart Compare Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected × OK
Quick view MAINSPRING CLAMPS Steel mainspring clamps. Used for removing mainsprings in clocks. Fits Alarm, 30-Hour, 8-Day, and large time clocks. Select from two different styles (4 round (1 3/8", 1 7/8", 2 3/8", 3") or 2 flat (2 3/16" O.D. x 1 7/8" I.D. x 5/32" deep). HR-4 set of... MSRP: Was: Now: $7.25 - $7.50 Choose Options Compare
Quick view LOOP END MAINSPRING WINDER Use either clock key or bench key to wind spring. Key and spring are not included. MSRP: Now: $9.75 Add to Cart Compare Compare Selected