HERSCHEDE LIFTING ARM PIN FOR EXTENSION BUSHING

Pin is fitted into the lifting long arm for the extension bushing. Pin has a small hole for a securing pin to keep the extension bushing connected to the long arm.  

HERSCHEDE CLICK SPRING ONLY - OLD STYLE (NO HOLDER)

Click spring only for old style holder fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings. Spring is flat for assembly into the click holder. ...

HERSCHEDE CLICK ASSEMBLY C.T. NEW STYLE - PARTS ONLY

Click assembly C.T. PARTS ONLY fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Utilizes new style spring.  Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings. NOTE:  The CLICK ASSEMBLY C.T...

HERSCHEDE QUARTER RACK ARM ONLY

Quarter rack arm ONLY fits Herschede 3 Weight Tubular Bell Movements. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE HOUR AND MINUTE HAND SET WITH WASHER FOR 11" DIAL

Hour and minute hand set WITH hand washer fits Herschede 3 Weight Tubular Bell Movements 11" Dial. Hour hand (HER-2500) comes with round brass bushing attached. Hole center to tip length: 3 7/8". Minute hand (HER-2503) comes with square brass bushing...

HERSCHEDE HOUR HAND FOR 11" DIAL

Hour hand fits Herschede 3 Weight Tubular Bell Movements 11" Dial. Comes with round brass bushing attached. Hole center to tip length:  3 7/8".  Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement...

HERSCHEDE ST GATHERING SHAFT ONLY

Pinion shaft fits Herschede 3 Weight Tubular Bell Movements including 1920's era and modern Herschede movements. This S.T. gathering shaft only is for the HER22624 S.T. Gathering Shaft Assembly. The shaft includes the pinion only, no HER22603 gathering...

HERSCHEDE HOUR AND MINUTE HAND SET FOR 11" DIAL

Hour and minute hand set fits Herschede 3 Weight Tubular Bell Movements 11" Dial. Hour hand (HER-2500) comes with round brass bushing attached. Hole center to tip length: 3 7/8". Minute hand (HER-2503) comes with square brass bushing attached.  Hole...

HERSCHEDE SECOND-HAND ASSEMBLY FOR 11" DIAL

Second-hand assembly fits Herschede 3 Weight Tubular Bell Movements 11" Dial.  Assembly includes second-hand, second-hand brass bushing, and screw. The Herschede 11" dial minute hand HER-2503, hour hand HER-2500, and hand sets (HER-2504 and...

HERSCHEDE SECOND HAND ONLY FOR 11" DIAL

Second hand fits Herschede 3 Weight Tubular Bell Movements 11" Dial. Sold as second hand only. The Herschede second hand bushing HER-2507 and second hand screw HER-2508 are sold as separate pieces.  Pictures are not actual size. Refer to...

HERSCHEDE HOUR RACK AND PIN SUB-ASSEMBLY - ARM ONLY

Hour rack and pin sub-assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually. This part is NOT the fully assembled hour rack as it does not include the small arms or the large bushing.  This part is the Hour Rack and Pin...

HERSCHEDE CLICK SPRING ASSEMBLY - OLD STYLE

Click spring assembly old style fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings. Spring is shaped for click assembly plate. Genuine Herschede part...

HERSCHEDE 9-TUBE CROWN WHEEL BRIDGE ASSEMBLY

9-TUBE crown wheel bridge assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.  Note:  the HER22642 for the 5-tube (no stock) has a...

HERSCHEDE QUARTER RACK PARTS

Quarter rack assembly fits Herschede 3 Weight Tubular Bell Movements. Sold in pieces and requires assembly. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE CT GATHERING SHAFT AND COLLAR ASSEMBLY

Pinion shaft fits Herschede 3 Weight Tubular Bell Movements including 1920's era and modern Herschede movements. This C.T. gathering shaft and collar assembly is for the HER22632 C.T. Gathering Shaft Assembly.  The part includes the pinion and...

HERSCHEDE WEIGHT STUD LONG

Weight long stud fits Herschede Strike and Time Train Weights.  Sold individually. Pictures are not actual size.  Length:  1  1/4".

HERSCHEDE WEIGHT STUD SHORT

Weight short stud fits Herschede Strike and Time Train Weights.  Sold individually. Pictures are not actual size.  Length:  7/8".

HERSCHEDE WEIGHT SHELL ROD - CHIME TRAIN

Weight shell rod fits Herschede Chime Train Weights. Sold individually. Pictures are not actual size.  Rod diameter:  .250".  Rod length:  8.625".

HERSCHEDE ESCAPE WHEEL SHAFT FOR 3 WEIGHT TUBULAR MOVEMENTS

HER22620 Escape wheel shaft fits the HER22083 Escape Wheel which when assembled results in a HER22618 part.  The HER22618 is for the Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch...

HERSCHEDE MOON CIRCLE FOR PETITE OR MODEL 1200

Moon circle fits Herschede Petite or Model 1200 Triple Chime Series. Sold individually. Size:  7 1/4" Outside arch width, 5 1/8" Inside arch width.  Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE HEMISPHERE SET

North America and Europe/Asia Hemispheres fits Herschede 3 Weight Tubular Bell Dials. Sold as a set with 4 screws. Hemisphere Length:  2.345" and Height:  .875".  Pictures are not actual size.

HERSCHEDE CYLINDER BRIDGE FOR 9-TUBE

Cylinder bridge fits Herschede 3 Weight 9-Tube Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE PULLEY(S) ASSEMBLY

Genuine high quality pulley assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually or as a set of 3. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE WEIGHT SHELL HOOK(S)

Weight shell hook(s) fits Herschede 3 Weight Tubular Bell Movement. Internal threads are 1/4-32 TAP x 9/16" Deep. Requires 3. Sold individually threaded, set of 3 threaded, or set of 3 unthreaded (no internal threads, the internal unthreaded weight shell...

HERSCHEDE CLICK SPRING AFTER 1977

Click spring after 1977 fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE TT MAIN SHAFT AND DRUM ASSEMBLY

TT main shaft and drum assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE GRID PENDULUM UPPER ROD ASSEMBLY

Grid pendulum upper rod assembly. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE 7 AND 9-TUBE HOUR SILENT LEVER ASSEMBLY

7 and 9-TUBE hour silent lever assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE DOUBLE LEVER ASSEMBLY

Double lever assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.

HERSCHEDE S.A. LEVER ASSEMBLY

S.A. lever assembly fits Herschede 3 Weight Tubular Bell Movements. Sold individually. Pictures are not actual size. Refer to Herschede-Jauch reference for movement drawings.