B&S WIRE AND DRILL GAUGE 0 - 36

American standard for ordering wire and sheet sizes from 0 to 36 (.325" to .005").  Decimal equivalents on the reverse side.   Simply insert wire into gauge. Made from heavy gauge, hardened stainless steel.  Satin finish for easy...

LANTERN PINION CUTTER AND SPLIT STAKING TOOL AND USE VIDEO

Versatile combination lantern pinion cutter and split stake tool.  No more finishing the ends of cut pinions as with this cutter it cuts cleanly and precisely every time!  When you buy the right tool, you save time! Hardened steel cutter for...

PINION WIRE FOR CUTTER AND PIVOTS

Genuine HAZ Laboratories pinion wire for use with HAZ Lantern Pinion Cutter & Staking Tool (LPC-2).  Wire can also be used for pivots. Comes in 12" lengths in a plastic tube.  Sample PW-59 shown in picture. Sold in packs of 6 wires of the...

PIVOT WIRE BLUE 12 PIECES ASSORTMENT 1.7MM - 2.81MM

All blue tempered steel pivot wire is 4 3/8"L. 12 piece assortment includes sizes 1.7mm (1), 2.15mm (5), 2.36mm (2), 2.46mm (1), 2.55mm (1), 2.76mm (1), and 2.81mm (1) diameters.  Sizes may vary slightly.  WARNING: This product may contain...

PIVOT WIRE BLUE 12 PIECES 4MM AND 3.2MM

All blue tempered steel pivot wire is 4 1/4"L. 12 piece assortment: six 3.2mm and six 4mm diameters.

BRASS WIRE COIL SIZE 20GA

B&S 20 gauge brass wire (.032" (.812mm)) comes in a 6 foot coil.  Brass wire has many uses in modeling and restoration of clocks. By Vigor in Germany.  WARNING: This product may contain lead and lead is on the California Proposition...

HAMMER LEATHER KIT FOR TUBULAR BELL CLOCKS

Hammer leather kit for tubular bell clocks.  Kit includes high quality supple leather strips and 22GA wire for wrapping leather to hammer. Great for restoration of tubular bell clocks such as Elite, Winterhalder & Hofmeier, Waltham, Elliott, Jos...

STEEL WIRE 12 PIECES

Steel wire length 6". Diameter: .064" (1.64mm). 12 pieces.

BRASS RIVET WIRE 12 ASSORTED 6"L

12 pieces of solid brass assorted wire diameters. Length: 6".

WIRE BENDERS WITH SLOT

Finally a wire bender that needs no modification to work for the clockmaker. Long enough to reach inside most all movements with a full 1/16" slot that will grab most all wires in clocks. 1/4" diameter with a "T" handle, this is the wire bender you have...

WIRE BENDER WITH WOOD HANDLE

Wood handle wire bender with over all length 7". Made India.

STEEL SPRING WIRE

Steel spring wire that has been tempered and ready for use. Will not break or set in use. Comes in 36" coils.

PIVOT WIRE BLUE 24 ASSORTED .57MM-2.0MM PIECES

Lengths vary from 3 1/8" to 4 1/2" blue tempered steel in 24 assorted sizes, ranging in .572mm - 2.057mm.

STEEL WIRE 36 ASSORTED

6" Lengths in 36 assorted sizes, ranging from 20-70 by drill guage.

BRASS WIRE ASSORTMENT

6" Lengths in 28 assorted sizes, ranging from 20-70 by drill guage. Comes in a plastic clear tube.