KWM BUSHING TOOL ACCESSORIES - AMERICAN

KWM bushing tool accessories includes large pusher, anvil, and 8.68mm reamer. Made in U.S.A.

BUSHING TOOL JIG

5 steps to support escape wheel bridge.  Brass. Size:  3 7/8"L x 3/8"W.  

BERGEON PUSHER TOOLS - AMERICAN MADE

Bergeon bushing tool replacement pushers/driving punches. Used to drive the bushing into the movement plate. Sold individually in three different sizes. Recommend that the pusher tool be used with the Bergeon Bushing Tool or with Bergeon handle (SKU:...

RATHBURN BUSHINGS

To replace old or worn-out bushings.  Simply place bushing over worn pivot hole and screw bushing to plate.  Each package contains 10 bushings.  Screws not included.

BERGEON 5 PIECE REAMER SET FOR KWM SIZED BUSHINGS

Cutting reamer assortment compatible with KWM bushing sizes. Supports the use of KWM bushings with the Bergeon 6200 bushing tool.   5 pieces in wooden base.1 piece each of 1.78 - 2.68 - 4.66 - 5.85 - 8.64 mm diameter. Made by Bergeon in...

BERGEON TOOL ACCESSORIES ASSORTMENT

Bergeon Bushing Tool Accessory Assortment Includes 21 pieces:1 pusher tool dia. 3 mm 1 pusher tool dia. 6 mm1 pusher tool dia. 9 mm1 centering tip 1 anvil undrilled 1 anvil drilled dia. 8 mm 1 anvil drilled dia. 10 mm 1 anvil...

BERGEON BUSHING TOOL WITHOUT ACCESSORIES

This tool has a bed with two sliding arms fitted with clamping screws, which allows the plate being worked to be held firmly in a horizontal position. Once this is done, it is very easy to get the perfect center. This tool allows the bushing of plated...

BERGEON 225 PIECE BRASS ASSORTMENT B31-B60

Bergeon B31 to B60 Brass assortment of 225 pieces.  30 sizes from 0.30mm to 6.50mm diameter pivot hole. Assortment includes 10 pieces each of B31 to B45 and 5 pieces each of B46 to B60. Made in Switzerland.

BERGEON 225 PIECE BRASS ASSORTMENT B1-B30

Bergeon B1 to B30 Brass assortment of 225 pieces.  30 sizes from 0.40mm to 6.00mm diameter pivot hole. Assortment includes 10 pieces each of B1 to B15 and 5 pieces each of B16 to B30. Made in Switzerland.

BERGEON BRONZE 100 PIECE BUSHINGS - SWISS MADE

Select the available Swiss Made Bergeon Bronze Bushing (BZS-part number) from the table below. Bushings are sold in packages of 100. Made in Switzerland.  

BERGEON BRASS 100 PIECE BUSHINGS - SWISS MADE

Select the available Swiss Made Bergeon Brass Bushing (BBS-part number) from the table below. Bushings are sold in packages of 100.

BERGEON SWISS CHAMFERING 10MM REPLACEMENT TOOL

Bergeon bushing tool replacement 10mm chamfering tool. Recommend that the chamfering tool be used with the Bergeon Bushing Tool or with Bergeon handle (SKU: Bergeon-Handle) only. Made in Switzerland.  

REAMER SET FOR KWM (FLUME) BUSHING TOOL

High quality genuine KWM German reamer set of 5 for American System and KWM sized bushings. Sizes included:  1.18mm (No. 1), 1.78mm (No. II), 2.69mm (No. III), 3.48mm (No. IV), and 5.85mm (No. V). Backside of reamers are rounded. Also individually...

SCREW FOR BERGEON 6200 CUTTING REAMERS SWISS

  Set screw for Bergeon cutting reamers.  The set screw is used to secure the cutting reamer in the shaft.  The set screw fits the Bergeon 6200 Clock Bushing Tool.   Size: 3mm high x 3.85mm diameter.   Made in Switzerland.

PIVOT LOCATOR 9 3/4"L

Put pivots in proper locations and reposition wheels without dismantling movement. Length: 9 3/4" with handle.

CUSTOM -MADE SOLID MAPLE BUSHING BOX

A custom-made box designed to hold many sizes of bushings. Made of beautiful solid MAPLE wood. Measures: 4 3/4" x 7 5/8" x 1". 60 holes in lid to help locate bushings. Bushings are not included. Bushing size labels supplied and can be attached or...

HERSCHEDE BA-5 BUSHING KIT TWO KWM GERMAN REAMERS

Herschede KWM bushing kit with two Flume GERMAN reamers consists of: one BA-5 System KWM size bushing assortment (100 bushings, 10 sizes at 10 each) one HRB-1 Herschede Back Plate Winding Arbor Bushings (10 bushings) one HFR-1 Herschede Front Plate...

HERSCHEDE BA-5 BUSHING KIT KWM GERMAN REAMER

Herschede KWM bushing kit with Flume GERMAN reamer consists of: one BA-5 System KWM size bushing assortment (100 bushings, 10 sizes at 10 each) one HRB-1 Herschede Back Plate Winding Arbor Bushings (10 bushings) one HFR-1 Herschede Front Plate...

HERSCHEDE BUSHING KIT BERGEON SWISS REAMERS

Herschede Bergeon bushing kit with SWISS made reamers consists of: one BA-5 System KWM size bushing assortment (100 bushings, 10 sizes at 10 each) one HRB-1 Herschede Back Plate Winding Arbor Bushings (10 bushings) one HFR-1 Herschede Front Plate...

JACOBS CHUCK AND KEY FOR BERGEON BUSHING TOOL

The Jacobs Chuck and Key are specifically for the Bergeon Bushing Tool 6200.  With the use of the chuck the Bergeon Bushing Tool 6200 can accept other tools and provides versatility. The clamping range is 0 - 4mm. The chuck comes with the key...

BERGEON BUSHING TOOL CENTER FRAME ONLY

Bergeon 6200 bushing tool center frame only. Not included is the chuck, handle, arms, or accessories (reamers, anvils, etc) Made in Switzerland.

PUSHERS - KWM GERMAN MADE

Genuine KWM precision pushers for American and KWM sized bushings. Use with the KWM bushing tool or hand tool.  Select size such that the pusher is slightly larger than the bushing outside diameter. Made in Germany by Flume (KWM).

BERGEON REAMERS FOR KWM - SWISS MADE

Reamers for Bergeon 6200 Bushing Tools or Bergeon handle (SKU: Bergeon-Handle). Genuine Bergeon Swiss made cutters fit American/KWM bushing sizes. Select from the different reamer sizes. Made in Switzerland.  

KWM REAMERS - FLUME GERMAN MADE

High quality genuine KWM German hand reamers for American and KWM sized bushings. Select from reamer sizes ranging from 1.18mm to 8.64mm, a chamfering tool, centering point, or a handle. Pieces sold individually.  A 5 piece KWM Flume reamer set (1...

CENTER SHAFT ONLY FOR KWM TOOL - GERMAN MADE

An upright center shaft replacement from the factory for the KWM Bushing Tool Set.  The shaft tool accepts the KWM reamers, chamfering, and pusher tools.  Size:  7 1/4"L. My by Flume (KWM) Germany.

ANVILS WITH HOLE - KWM GERMAN MADE

Anvil I (No. 1), Anvil II (No. 2), Anvil III (No. 3), Anvil IV (No. 4), Anvil V (No. 5), and Anvil VI (No. 6) with hole for use with KWM, K&D, and Drill-A-Bush tools.  Blackened finish.  Select size. Pieces sold individually.  By Flume...

BERGEON BRONZE 10 PIECE BUSHINGS - SWISS MADE

Select the available Swiss Made Bergeon Bronze Bushing (BZS-part number) from the table below. Bushings are sold in packages of 10. Made in Switzerland.  

BERGEON BRASS 10 PIECE BUSHINGS - SWISS MADE

Select the available Swiss Made Bergeon Bushing (BBS-part number) from the table below. Bushings are sold in packages of 10.

PIVOT GAUGE KWM REAMER AND BUSHING

Shows diameter of pivot and reference number of both KWM reamer and bushing.  Capacity 0.1mm to 4.8mm as follows: 0.1mm to 0.6mm by 0.05mm 0.6mm to 2.0mm by 0.1mm 3.0mm to 4.8mm by 0.2mm Size: 2.6" W x 8.7"L.  Made in Germany by Flume.

HANDLE FOR BERGEON REAMERS

Handle for use with genuine Bergeon reamers.  Knurled handle is made of steel and comes with hex wrench for tightening reamers.  Handle: 4 1/2" L. Purchase individual Bergeon reamers (SKU's: 6200) and place in the hand tool to ream your...