OLD STYLE FLAT TAPERED 1" WEDGE PINS - 50 PACK

Old style brass flat tapered pins with 50 in a package. Choose from three taper pin size options. All pins 1"L.  BFP-1 are .025" thick, BFP-2 are .032" thick, and BFP-3 are .040" thick.

DIAL AND PAN FOR MANTEL CLOCKS 5 5/16" ROUND ROMAN

Bright gold finish roman dial and bezel fits most Black Mantel clocks. Embossed dial and pan assembly with white dial. Diameter: 5 5/16".  Select from dial/bezel with flat glass or dial pan only.

ESCUTCHEON BRASS KEY HOLE 1"W X 3 1/8"H

Fancy cast brass key hole escutcheon. Size: 1"W X 3 1/8"H.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead during...

ESCUTCHEON BRASS KEY HOLE 15/16"W X 3 3/8"H

Fancy cast brass key hole escutcheon. Size: 15/16"W X 3 3/8"H.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead...

ESCUTCHEON BRASS KEY HOLE 7/8"W X 2 3/8"H

Fancy cast brass key hole escutcheon. Size: 7/8"W X 2 3/8"H.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead during...

BRASS CABLES 5/64" THICKNESS

Real brass 5/64" (.078") thick cable. Cable can be used for all types of weight-driven clocks.

BRASS CABLES 3/64" THICKNESS

Real brass 3/64" (.048") thick cable. Cable can be used for all types of weight-driven clocks.

BRASS CABLES 1/32" THICKNESS

Real brass 1/32" (.031") thick cable. Cable can be used for all types of weight-driven clocks.

BRASS CABLES 1/16" THICKNESS

Real brass 1/16" (.0625") thick cable. Cable can be used for all types of weight-driven clocks. NOTE: The Herschede BC-060 cable is slightly smaller than the 1/16" cable and be used as an alternative.  The Herschede cable is equal in strength...

GENUINE HERSCHEDE BRASS CABLES

High quality genuine Herschede brass cable made to Herschede specifications. Fits precisely to Herschede movements and pulleys. Same in texture and size as original cable. Size length options provided: 11 feet for 1 train, 25 feet for 3 trains, 50 feet...

CHROME BEZEL 7" WITH GLASS PUSH ON

Chrome bezel with convex glass. Bezel front edge is beveled and back has a plastic ring to push-on the bezel. No prongs or hinge for mounting bezel. Measurements are in inches and size indicates outside diameter.  Used on Herschede clocks.

BRASS BEZELS WITH GLASS PUSH ON STYLE

Brass bezels with convex glass. Bezel front edge is beveled and back has a plastic ring to push-on the bezel. No prongs or hinge for mounting bezel. Measurements are in inches and size indicates outside diameter.  Used by Herschede mantel clocks as...

LUX PENDULETTE BLUE BIRDS

Lux Pendulette metal blue birds left (BBL-1) and right (BBR-2) facing.

BRASS BEZEL HINGE AND GLASS TABS 1 1/4"L x 1"W

Brass bezel hinge, glass tabs, and latch. Hinge measures: 1 1/4"L x 1"W.

BRASS BEZEL HINGE GERMAN THREADED SCREW TYPE

Threaded screw-type brass bezel hinge for German clocks.  This is a high quality solid brass hinge. The two end pieces have a set screw that secures to the center pin. The end piece size:  .1355"H and .2160"L.  

BRASS BEZEL 5 7/8" WITH GLASS-FIXED PRONGS

Brass bezel with convex glass. Two fixed prongs for mounting bezel. Diameter: 5 7/8". Prong pin length measured from bezel rim: 1". Measurements are in inches and size indicates outside diameter.

BRASS BEZEL 5 7/8" NO GLASS WITH FIXED PRONGS

Brass bezel with no glass. Two fixed prongs for mounting bezel. Diameter: 5 7/8". Prong pin length measured from bezel rim: 1". Measurements are in inches and size indicates outside diameter.

BACK BOARD FOR BLACK MANTLE CLOCKS

Natural wood with a precut 4 3/4" diameter hole. Back board wood panel is stained a flat black. Size: 14"L x 7 31/32"H.

BRASS BEZELS WITH GLASS-PRONG HINGE-LATCH

These bezels are high quality solid brass. There are two swivel hinge prongs and a door latch. Prong pins are of different lengths for each bezel size. Bezels do not include nuts. Measurements are in inches and size indicates outside diameter.

BRASS BEZEL 7 3/4" GLASS-RECTANGLE HINGE-LATCH

Brass bezel with glass. Rectangle hinge and latch. Diameter: 7 3/4". Measurements are in inches and size indicates outside diameter.

BRASS BEZEL 5 7/8" PRONG HINGE-LATCH-NO GLASS

Brass bezel with no glass. Two-prong hinge and latch. Diameter: 5 7/8". Prong pin length: 1". Measurements are in inches and size indicates outside diameter.

BRUSHED BRASS BEZEL 13" NO GLASS

Brushed brass bezel with no glass. Diameter: 13". Outside Depth: 1". Measurements are in inches and size indicates outside diameter.

BERGEON STYLE BRASS BUSHING ASSORTMENT HEIGHT VARIETY

Each assortment has 100 bushings which are at a variety of different heights. 10 of each size. For refills use BB + bushing number.  American made Bergeon style bushings.

BERGEON STYLE BRASS BUSHING ASSORTMENTS 3.0mm HEIGHT

Each assortment has 100 bushings which are all at 3.00mm Height. 10 of each size. For refills use BB + bushing number.  American made Bergeon style bushings.

BERGEON STYLE BRASS BUSHING ASSORTMENT 2.00mm HEIGHT

BB-A3 and BB-A4 assortments have 100 bushings at 2.0 mm Height. 10 of each size. For refills use BB + bushing number. BB-A3 consists of BB-33, -36, -38, -39, -41, -308, -42, -43, -44, and -46. BB-A4 consists of BB-47, -48, -50, -51, -52, -53, -54, -55,...

BERGEON STYLE BRASS BUSHING ASSORTMENTS 1.5mm HEIGHT

Each assortment has 100 bushings which are all at 1.5mm Height. 10 of each size. For refills use BB + bushing number.  American made Bergeon style bushings.

BERGEON STYLE BRASS BUSHINGS - AMERICAN MADE

Select the available American Made Bergeon Bushing (BB-part number) from the table below. Bushings are sold in packages of 20.

BAROMETER ANEROID MOVEMENT

Base size: 46.19mm W x 42.5mm H. Minimum depth: 11.7mm.

ITHACA BEZELS WITH SUPPORTING INNER RING

Ithaca bezels with supporting inner ring. Glass is not included. Select from the different bezel sizes.

AMERICAN BRASS KWM BUSHING ASSORTMENT #6

American made "The System" 100 brass bushing assortment. 10 of each size. For BA refills: Use American Made KWM Size Brass L + bushing number. For example: American Made KWM Size Brass L-14 when available. Otherwise use American Made Brass 5 digit number...