BERGEON STYLE BRONZE BUSHINGS - AMERICAN MADE

Select the available American Made Bergeon Bronze Bushing (BZ-part number) from the table below. Bushings are sold in packages of 20.  

BAROMETER BEZEL WITH FLAT GLASS

Brass 3 9/16" barometer bezel with flat glass.

BRASS BUSHING WIRE 12 PC ASSORTMENT

12 pieces of quality, seamless, brass bushing wire. Assorted diameters ranging from .80mm to 4.5mm.  Larger sizes than the BWA-11 assortment.

BRASS WASHER ASSORTMENT (.28", .19", .22")

50 flat brass washer assortment in .28", .22", and .19" sizes.

BRASS GLASS TABS

Brass tabs to secure glass to bezel. 20 assorted pieces.

BACK PLATES FOR MANTEL CLOCKS

Back plates for mantel and China clocks. Comes in three different sizes.

KIENINGER BUSHING

Winding arbor bushing for the modern Kieninger cable drive clock movements. Bushing is Front Type.

BATTERY SPADE CLOCK HANDS BLACK OR GOLD

I-shaft. Battery hands for dial sizes 3 1/2" (gold only), 4 1/2", 5", 7", 8", and 10" in black or gold. Sizes 11", 12", 14", and 16" are in black only. Size indicates dial diameter (not the hand length). BHSP-1600 (16" Dial):  minute hand 8"L and...

BATTERY SERPENTINE CLOCK HANDS BLACK OR GOLD

I-shaft. Battery hands for dial sizes 4", 5", 6", 8", and 9" in black or gold. Size indicates dial diameter (not the hand length).

BATTERY MALTESE CLOCK HANDS BLACK OR GOLD

I-shaft. Battery hands for dial sizes 4" and 6" in black or gold. Size indicates dial diameter (not the hand length).

BATTERY DIAMOND CLOCK HANDS BLACK OR GOLD

I-shaft. Battery hands for dial sizes 3", 4", and 6" in black or gold. Size indicates dial diameter (not the hand length).

BATTERY CLOCK HANDS X-LARGE BLACK

Battery hands for extra large dial. Hour hand: round brass bushing. Minute hand: oblong cut hole. Minute physical hand size: 12" center of hole to tip plus 6 3/8" center of hole to tail tip. Hour physcial hand size: 9" center of hole to tip.

ANSONIA URN FINIAL 2 1/8" TALL

Top urn finial for Ansonia clocks. Cast metal. Antique gold finish. Size: 2 1/8" Tall.

ANSONIA URN FINIAL 1" TALL

Top urn finial for Ansonia clocks. Cast metal. Antique gold finish. Size: 1" Tall.

OLD STYLE FLAT TAPERED 1" WEDGE PINS - 50 PACK

Old style brass flat tapered pins with 50 in a package. Choose from three taper pin size options. All pins 1"L.  BFP-1 are .025" thick, BFP-2 are .032" thick, and BFP-3 are .040" thick.

DIAL AND PAN FOR MANTEL CLOCKS 5 5/16" ROUND ROMAN

Bright gold finish roman dial and bezel fits most Black Mantel clocks. Embossed dial and pan assembly with white dial. Diameter: 5 5/16".  Select from dial/bezel with flat glass or dial pan only.

ESCUTCHEON BRASS KEY HOLE 1"W X 3 1/8"H

Fancy cast brass key hole escutcheon. Size: 1"W X 3 1/8"H.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead during...

ESCUTCHEON BRASS KEY HOLE 15/16"W X 3 3/8"H

Fancy cast brass key hole escutcheon. Size: 15/16"W X 3 3/8"H.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead...

ESCUTCHEON BRASS KEY HOLE 7/8"W X 2 3/8"H

Fancy cast brass key hole escutcheon. Size: 7/8"W X 2 3/8"H.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead during...

BRASS CABLES 5/64" THICKNESS

Real brass 5/64" thick cable. Cable can be used for all types of weight-driven clocks.

BRASS CABLES 3/64" THICKNESS

Real brass 3/64" thick cable. Cable can be used for all types of weight-driven clocks.

BRASS CABLES 1/32" THICKNESS

Real brass 1/32" thick cable. Cable can be used for all types of weight-driven clocks.

BRASS CABLES 1/16" THICKNESS

Real brass 1/16" thick cable. Cable can be used for all types of weight-driven clocks. NOTE: The Herschede BC-060 cable is slightly smaller than the 1/16" cable and be used as an alternative.  The Herschede cable is equal in strength capability...

GENUINE HERSCHEDE BRASS CABLES

High quality genuine Herschede brass cable made to Herschede specifications. Fits precisely to Herschede movements and pulleys. Same in texture and size as original cable. Size length options provided: 11 feet for 1 train, 25 feet for 3 trains, 50 feet...

CHROME BEZEL 7" WITH GLASS PUSH ON

Chrome bezel with convex glass. Bezel front edge is beveled and back has a plastic ring to push-on the bezel. No prongs or hinge for mounting bezel. Measurements are in inches and size indicates outside diameter.  Used on Herschede clocks.

BRASS BEZELS WITH GLASS PUSH ON STYLE

Brass bezels with convex glass. Bezel front edge is beveled and back has a plastic ring to push-on the bezel. No prongs or hinge for mounting bezel. Measurements are in inches and size indicates outside diameter.  Used by Herschede mantel clocks as...

LUX PENDULETTE BLUE BIRDS

Lux Pendulette metal blue birds left (BBL-1) and right (BBR-2) facing.

BRASS BEZEL HINGE AND GLASS TABS 1 1/4"L x 1"W

Brass bezel hinge, glass tabs, and latch. Hinge measures: 1 1/4"L x 1"W.

BRASS BEZEL HINGE GERMAN THREADED SCREW TYPE

Threaded screw-type brass bezel hinge for German clocks.  This is a high quality solid brass hinge. The two end pieces have a set screw that secures to the center pin. The end piece size:  .1355"H and .2160"L.  

BRASS BEZEL 5 7/8" WITH GLASS-FIXED PRONGS

Brass bezel with convex glass. Two fixed prongs for mounting bezel. Diameter: 5 7/8". Prong pin length measured from bezel rim: 1". Measurements are in inches and size indicates outside diameter.