B&S WIRE AND DRILL GAUGE 0 - 36

American standard for ordering wire and sheet sizes from 0 to 36 (.325" to .005").  Decimal equivalents on the reverse side.   Simply insert wire into gauge. Made from heavy gauge, hardened stainless steel.  Satin finish for easy...

ADAPTER PIN CHUCK 4 PIECE SET FOR DRILLS

The adapter chuck is suited for Bench Drills for holding smaller drills which creates accuracy and stability.  Includes three collets supporting 0 to .098" (2.5mm) diameters. Overall adapter chuck length:  2 1/4". The adapter chuck shank: 1/4"...

MASCOT TWIST DRILL 36 PIECE ASSORTMENT MADE IN GERMANY

Mascot twist high speed steel drill assortment. Set of 36 with sizes 33-80 in a wooden stand. By Grobet, made in Germany.

LEATHER HOLE PUNCH TOOL - 6 HOLES

Leather hole punch with six multi-hole sizes.  The working tip is a hollow steel cylinder with a sharp circular knife-like edge.  Smallest punch inside hole:  2.49mm I.D.  Largest punch inside hole:  4.33mm I.D.   Can...

WOODEN BUR/DRILL BOX WITH 36 HOLES

Wood box protects burs keeps them handy at all times. Holds 36 tools such as bur/drill bits, small brushes/buffs.  Hole size supports 3/32" or 1/8" tools. Size: 3"L x 3"W x 2 3/4"H.  Burs not included and shown in picture for demonstration...

MASCOT FLAT PIVOT DRILLS

High quality carbon steel pivot drills for drilling brass, mild steel, aluminum, etc. Right hand with rake angle of zero degrees. Shank diameter for sizes .004" to .026" is 1 mm, and for sizes .028" to .050" shank is 1.5 mm. Sold individually...

FOREDOM 10 BUR BIT SET

High speed Foredom 10 bur bit set.  Cutters for shaping, slotting, and cutting in wood, plastic, ans soft metals.  Each bur bit is unique.  Shaft diameter:  .091" (2.31mm).  Shaft length (does not include the tip):  .523"...

BUSCH BURS STEEL FIG 77B CONCAVE CUP PK 6

Tungsten vanadium steel cutter burs have smaller teeth and can be used for precise uniform cuts.   Sold as a package of six cutter burs of the same size concave cup. Shaft length 1 3/4" and 3/32" diameter shank. Cup Size D1:  1.50...

PANTHER BURS CYL SQ XCUT #21 GERMAN

High quality tungsten vanadium steel cylinder square cross cut #21 burs.  Sold individually.  Shank diameter 3/32".  Shaft length 1 3/4".  Select from six different sizes:  77.2114 014 (1.4mm) 77.2116 016 (1.6mm) 77.2118 018 (1...

PANTHER BURS TUNGSTEN CARBIDE CYLINDER CROSS CUT

Tungsten carbide cylinder cross cut #H31 burs.  Sold individually.  Shank diameter 3/32".  Shaft length 1 3/4".  Select from seven different sizes:  77.6108 008 (.80mm) 77.6109 009 (.90mm) (Shown in picture) 77.6110 010 (1...

PANTHER BURS TUNGSTEN CARBIDE CONE ROUND END CROSS CUT EXTRA FINE

Tungsten carbide cone round end cross cut extra fine #H33FRS burs.  Select from two different sizes:  77.5709 009 (.90mm) and 77.5710 010 (1.0mm).  Shank diameter 3/32".  Shaft length 1 3/4".   Sold individually (single bur)...

PANTHER BURS CONE SQUARE CROSS CUT #23 SET OF 12

Set of 12 cone square cross cut #23 burs.  These burs are made of the finest quality hardened tool steel.  Sizes: 006 (.60mm), 007 (.70mm), 008 (.80mm), 009 (.90mm), 010 (1.0mm), 011 (1.1mm), 012 (1.2mm), 013 (1.3mm), 014 (1.4mm), 016 (1.6mm),...

PANTHER BURS CYLINDER SQ CROSS CUT #21 SET OF 12

Set of 12 cyclinder square cross cut #21 burs.  These burs are made of the finest quality hardened tool steel.  Sizes: 006 (.60mm), 007 (.70mm), 008 (.80mm), 009 (.90mm), 010 (1.0mm), 012 (1.2mm), 014 (1.4mm), 016 (1.6mm), 018 (1.8mm), 021 (2...

PANTHER BURS INVERTED CONE SET OF 12

Set of 12 inverted cone #3 burs.  These burs are made of the finest quality hardened tool steel.  Sizes: 006 (.60mm), two 007 (.70mm), 008 (.80mm), 009 (.90mm), 010 (1.0mm), 012 (1.2mm), 014 (1.4mm), 016 (1.6mm), 018 (1.8mm), 021 (2.1mm), and...

PANTHER BURS WHEEL #2 SET OF 12

Set of 12 wheel #2 burs.  These burs are made of the finest quality hardened tool steel.  Sizes: 006 (.60mm), 007 (.70mm), 008 (.80mm), 009 (.90mm), 010 (1.0mm), 012 (1.2mm), 014 (1.4mm), 016 (1.6mm), 018 (1.8mm), 021 (2.1mm), 023 (2.3mm), and...

TAP FOR GONG BASES 8MM MADE IN U.S.A.

Tap for gong bases.  Size:  8mm.  Can be used for screw tapping and screw repair.  Total length:  2 7/8".  Marked:  MBX1.25 HS D3 U.S.A.

FORSTNER BIT 3 1/8"

Forstner drill bit.  3 1/8" cut size.  Max 620 RPM.  Shaft 4 5/8" total length.  Made in China.

FORSTNER BIT 1 7/8"

Forstner drill bit.  1 7/8" cut size.  Max 450 RPM.  Shaft 2 7/8" total length.  Made in China.

FORSTNER BIT 1 3/8"

Forstner drill bit.  1 3/8" cut size.  Max 450 RPM.  Shaft 3" total length.  Made in China.

ADJUSTABLE TAP WRENCH

Handheld adjustable tap wrench which can be used for screw tapping and screw repair.  Size:  7"L x 1"W x 1/2"D.

BUR ASSORTMENT HIGH QUALITY 24 PIECES

High quality Bur assortment.  Assortment includes four different sizes (557, 560, 33 1/2, 39) with 6 pieces of each for a total of 24 burs.   Made of Vanadium steel.  Emesco Vanadium Steel burs 557 are 560 are made in Canada...

DELUXE HART BUR SET OF 6

Deluxe Hart Bur 6 piece set.  Set includes 021-031 sizes with graduated size tips.  Made of Vanadium steel.  The tip precise fluting will give a consistently smooth and even cutting and finishing.  For use where precision is required...

DRILLING AND FILING FIXTURE

This tool allows you to safely secure small parts that are normally impossible to steady when drilling. Size: 4"L X 4"W X 1/2"D.

BENCH TOP DRILL PRESS GROBET

Small and lightweight, this drill press is uniquely designed for small precision applications. This single phase, adjustable speed motor allows for control and ease of use. 110 volts. 100 watts.  Also available: bench top drill press replacement...

DRILL SET 13 PIECES ENGLISH/METRIC

Straight shank twist drill assortment. 13 piece high speed straight shank twist drill assortment in a handy hang up drill case. English 1/16" to 1/4" and metric set 1.4mm to 6.4mm. Made in Taiwan.

MASCOT TWIST DRILL BITS MADE IN GERMANY

High speed steel with outstanding combination of precision, durability, and economy. Straight shank wire twist drill sizes 30-88. Sizes indicated by drill guage. Sold individually. Made in Germany. Grobet.

MASCOT TWIST DRILL ASSORTMENT MADE IN GERMANY

Mascot twist high speed steel drill assortment. Set of 20 with sizes 61-80 in a plastic case. Made in Germany.