Product Description
LYRE HANGER 92 X 280MM FOR 270MM BOB DISC PENDULUMS - POLISHED BRASS FINISH
Polished brass finished hanger for lyre pendulums with a 270mm (10 1/2") diameter bob disc. Measures: 92mm W (base) x 280mm H (from top to base) (3 5/8" W x 11" H).
The hanger has a total of five holes, two holes at top for hook and three holes at the base for attachment to the top back bracket. The top hook holes are 9.96mm (.392") apart center to center, hook not included. The three base holes are not straight across; the center hole is slightly higher than the two outside holes. The center hole is 11mm (.435") from the bottom edge. The two outside holes are 67.71mm (2.66") apart center to center.
The hanger is stainless steel and the back is unfinished. The hanger has a protective film that should be gently removed. Recommend wearing gloves when handling any brass parts.
The hanger is flat with no brackets.
WARNING:
- This product may contain lead, and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm. Exposure to lead during pregnancy can affect brain development and cause learning and behavior problems for the child. Exposure to lead can harm the reproductive systems of men and women.
- Lead and lead compounds also are on the Proposition 65 list because they can cause cancer. Exposure to lead and lead compounds may increase cancer risk.
- For more information go to: www.P65Warnings.ca.gov.
