HERMLE VERGE SLOT 24MM SMALL ANCHOR

Dead beat verge for Hermle 131 and 261. Overall pin tip to pin tip:  24mm.  Anchor front to pin tip:  11mm L.  Anchor back to pin tip:  12mm L. Anchor width from outside...

HERMLE VERGE SLOT DEAD BEAT 14MM

Dead beat verge for Hermle 451, 1151, and 1161. Overall pin tip to pin tip:  37mm.  Anchor front to pin tip:  22mm L.  Anchor back to pin tip:  14mm L. Anchor width from...

HERMLE VERGE SLOT DEAD BEAT 14MM WITH COMPRESSION WASHER

Dead beat verge for Hermle 451, 1151, and 1161 with a compression washer. Overall pin tip to pin tip:  37mm.  Anchor front to pin tip:  22mm L.  Anchor back to pin tip:  14mm...

HERMLE VERGE SLOT DEAD BEAT 37MM

Dead beat verge for Hermle 141, 151, 241, 351, 451, 1051, 1151, 1161, and 2061. Overall pin tip to pin tip:  37mm.  Anchor front to pin tip:  20mm L.  Anchor back to pin...

HERMLE WASHER REDUCE GEAR (A-188)

Hermle movement washer reduce gear.

HERMLE WHEEL(10-2)

Hermle Wheel fits Hermle movements 140, 141, 150, 151, and 241.

HERMLE WINDING ARBOR (E-27)

Hermle movement winding arbor.

HERMLE WINDING ARBOR PIN WITH RATCHET WHEEL 15MM L

Winding Arbor Pin with a milled ratchet wheel attached. Winding Arbor: 15 mm L.  (measured from the ratchet wheel to the tip of the arbor) Square arbor: 3.93 mm (.155") Winding Arbor Pin is...

HERMLE WINDING ARBOR PIN WITH RATCHET WHEEL 20MM L

Winding Arbor Pin with a milled ratchet wheel attached. Winding Arbor: 20 mm L.  (measured from the ratchet wheel to the tip of the arbor) Square arbor: 3.93 mm (.155") Winding Arbor Pin is...

HERMLE WINDING ARBOR PIN WITH RATCHET WHEEL 35MM L

Winding Arbor Pin with a milled ratchet wheel attached. Winding Arbor: 35 mm L.  (measured from the ratchet wheel to the tip of the arbor) Square arbor: 3.93 mm (.155") Winding Arbor Pin is...

HERMLE WOODEN PENDULUM STICKS UNFINISHED

Hermle wooden pendulum sticks with hook and rating assembly. Select from various lengths/widths. Wooden rods are unfinished. Noted in ( ) is the approximate length of the pendulum stick from hook...

HERMLE WOODEN PENDULUM STICKS VARIETY

Hermle wooden pendulum sticks with hook and rating assembly. Select from various lengths. Noted lengths are from hook top to metal threaded rod end. All sticks are 3/4" wide. Wooden rods are...

HERMLE WOVEN WALL CLOCK OAK DUAL CHIME

Hermle wall clock with oak color finish and woven design pattern. A brass bezel with convex glass covers the black Roman numeral and a light tan colored dial with black metal spade hands. The clock...

JUNGHANS 271 ROUND MOVEMENT 4 JEWELS

Junghans 271 4-jewel 26/0217, 60/143 new movement in original box.  Comes with original instructions sheet and Junghans guarantee sheet.  Single mainspring with hook on top.  Brass...

KIENINGER LYRE GRID PENDULUM 165MM BOB FITS 93CM MOVEMENTS

Kieninger Lyre Polished Brass Pendulum. Plain Bob.  Complete with hook, threaded rod, and rating nut.  Size:  93cm with 165mm Bob.  WARNING: This product may contain lead and...

KIENINGER LYRE GRID PENDULUM 220MM BOB FITS 100CM MOVEMENTS

Kieninger Lyre Polished Brass Pendulum. Straight rods alternating between gold and silver.  Plain polished bob.  Complete with hook, threaded rod, and rating nut.  Size:  100cm...

ORNATE PENDULUM 114/270

Polished brass finish with elaborate bob. Lyre pendulum with round rods. 114cm with 270mm bob. Hermle hook.  WARNING: This product may contain lead and lead is on the California Proposition...

PENDULUM ROD AND BRUSHED BRASS BOB 85CM/165MM GERMAN

Hermle brushed brass straight rod and Bob. Overall length:  34 1/4"L (tip to tip). Bob diameter:  165mm (6 1/2").  WARNING: This product may contain lead and lead is on the California...

SCREW ASSORTMENT FOR HERMLE 15 PIECES

A 15 piece assortment of small screws for Hermle.

SETH THOMAS LION PENDULUM

Reproduction of original design. Finished in antique brass. Supplied with 6 1/4" oval rod and knurled brass rating nut. 2 1/2" Bob.  WARNING: This product may contain lead and lead is on the...

SIMULATED MERCURY PENDULUM 114/270

Polished brass finish with simulated mercury center. 114cm with 270mm bob. Hermle hook.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it...

SUSPENSION SCREW FOR HERMLE

Suspension screw for Hermle clocks. Sold individually.

SUSPENSION SPRING .93"L

Suspension spring 23.5mm (.93")L x 10mm (.4")W.  Spring steel 1/8"L.  Pin hole to op:  16.5mm (. 65")L. No pin.

SUSPENSION SPRING 1 3/4"L WITH SPRING STRENGTH 0.12"

Suspension spring 1 3/4"L x 3/8"W.  Spring steel 9/16"L.  Spring steel thickness:  0.12".  Pin on one end.  Suspension spring for wall clocks and others.

TEXAS TECH UNIVERSITY PENDULUM 114/270

Polished brass finish with embossed bob. Bob is embosed with "Texas Tech University" and "Lubbock" and in the center is the university crest.  Lyre pendulum with twisted rods. 114cm with 270mm...

U.S. MARINE CORPS PENDULUM 114/270

Polished brass finish with engraved/embossed bob. Bob is embossed with "United States" and "Marine Corps" and in the center is the Marine Corps crest.  Lyre pendulum with twisted rods. Fits a...

UNIVERSITY OF COLORADO PENDULUM 114/270

Polished brass finish with engraved/embossed bob. Bob is embossed with "University of Colorado" and "1876" and in the center is the university crest.  Lyre pendulum with twisted rods. Fits a...

VERGE BRIDGE 22MM

Hermle verge low bridge 22mm suspension spring post.  Low bridge for front pendulum type only. Overall length from slot post tip to back of bridge:  22mm L.  WARNING: This product may...

VERGE LOW BRIDGE SUSPENSION POST 24MM

Hermle verge low bridge 24mm (suspension bridge). Overall length from slot post tip to back of bridge:  24mm L. Back of bridge to post hole:  20mm L. Slot 10mm L.  WARNING: This...

VERGE LOW BRIDGE SUSPENSION POST 27MM

Hermle verge low bridge 27mm (suspension bridge). Overall length from slot post tip to back of bridge:  27mm L. Back of bridge to post hole:  21.4mm L.  WARNING: This product may...