NEW HAVEN DOUBLE END BRASS TRADEMARK KEY #8

New Haven double end brass key number 8/0.  Size 4mm with 2.25mm small end. Made in U.S.A.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive...

EN WELCH SINGLE END BRASS TRADEMARK KEY

Single end EN Welch trademark brass key. Size 6. Made in U.S.A.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead...

F. KROEBER SINGLE END BRASS TRADEMARK KEY

Single end F. Kroeber trademark brass key. Size 6. Made in U.S.A.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead...

ANSONIA SINGLE END BRASS TRADEMARK KEY

Single end Ansonia trademark brass key. Size 6. Made in U.S.A.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause birth defects or other reproductive harm.  Exposure to lead...

SETH THOMAS WORLD BRASS COVERED BOB - 3 1/2" DIAMETER

3 1/2" Seth Thomas brass cover lead Bob. Bob back slot is 1/2" wide. Bob weighes 1 pound 8.3 ounces. NOTE:  there is some slight brass lacquer finish peeling in the center of the Bob.  WARNING: This product may contain lead and lead is on the...

SETH THOMAS JUPITER/LUNAR BOB - 3 1/4" DIAMETER

3 1/4" Seth Thomas reproduction cast Bob.  Finish is antique old style. Bob back three slots are all the same at 9/16" inside width. Bob weighes 8 ounces.    WARNING: Lead is on the Proposition 65 list because it can cause birth...

GILBERT BOB - 4 1/2" DIAMETER

4 1/2" Gilbert reproduction cast Bob.  Bob has two different slots on each end for the pendulum stick.  One slot is 5/8" W as measured on inside for a flat rod, the other slot is for a small round rod at 3/16"W inside.   ...

BERGEON PUSHER TOOLS - AMERICAN MADE

Bergeon bushing tool replacement pushers/driving punches. Used to drive the bushing into the movement plate. Sold individually in three different sizes. Recommend that the pusher tool be used with the Bergeon Bushing Tool or with Bergeon handle (SKU:...

SETH THOMAS DOUBLE END BRASS KEY SIZE 9/4

Seth Thomas double end brass key. Trademark "ST". Size: 9/4.  Large end measures 4.00mm and small end 1.75mm. Made in U.S.A.  WARNING: This product may contain lead and lead is on the California Proposition 65 list because it can cause...

SMALL AND MEDIUM BRASS HAND BUSHINGS 60 PIECES

Assorted small and medium brass hour and minute hand bushings. 60 piece assortment. Useful for wall and mantel clocks. Largest hour hand bushing:  5.36mm I.D. x 5.46mm H Medium hour hand bushing:  4.41mm I.D. x 4.49mm H Smallest hour hand...

SMALL AND MEDIUM BRASS HAND BUSHINGS 14 PIECES

High quality assorted small and medium brass hour and minute hand bushings. 14 piece assortment. Useful for wall and mantel clocks. Largest hour hand bushing:  5.36mm I.D. x 5.46mm H Medium hour hand bushing:  4.41mm I.D. x 4.49mm H Smallest...

PENDULUM QUARTZ BATTERY ROD 15 3/4"L SOLID HOOK

Break-away (adjustable) quartz pendulum rod for use with Seiko and other battery movements. Solid rod hook and opposite blunt end which slips into back of battery bob Overall length:  15 3/4"L Scored 1" break-away...

PENDULUM QUARTZ BATTERY ROD 15 3/4"L FORKED HOOK

Break-away (adjustable) quartz pendulum rod for use with Takane battery movements. Forked rod hook and opposite blunt end which slips into back of battery bob Overall length:  15 3/4"L Scored 1" break-away increments  WARNING: This product...

SUSPENSION SPRING WITH PENDULUM LEADER EXTENSION 112MM L

German-made, plastic-tipped spring with pin at the end of spring. Block and spring:  36mm (1.4")L x 4mm (.16")W Spring thickness: 5mm (.196") Spring only:  28mm (1.1")L Total Length with spring extension: 112mm (4 7/16")L Spring block hole to...

CUCKOO CLOCK 6"L PLASTIC WEIGHT PAIR

Cuckoo clock weights for quartz cuckoo clocks.  The weights are plastic in the traditional cuckoo weight shape.  Antique dark finish. Overall length:  150mm (5.9")L. Diameter: 50mm (1.96"). Sold as a pair.

CUCKOO CLOCK 4"L PLASTIC WEIGHT PAIR

Cuckoo clock weights for quartz cuckoo clocks.  The weights are plastic in the traditional cuckoo weight shape.  Antique dark finish. Overall length:  100mm (3.94")L. Diameter: 30mm (1.18"). Sold as a pair.

REGULA 72 MOVEMENT (8 DAY WITH DANCERS, NO MUSIC)

Cuckoo call and gong on the half hour and hour.  Includes: chains, rings, and hooks. Dancer table height 81 mm (3.189") measured from the hand-shaft to the top of the platform. Pendulum length 28.5 cm (11.22").  The pendulum length is measured...

BERGEON 225 PIECE BRASS BUSHING ASSORTMENT B31-B60

Bergeon B31 to B60 Brass assortment of 225 pieces.  30 sizes from 0.30mm to 6.50mm diameter pivot hole. Assortment includes 10 pieces each of B31 to B45 and 5 pieces each of B46 to B60. Made in Switzerland.

BERGEON 225 PIECE BRASS BUSHING ASSORTMENT B1-B30

Bergeon B1 to B30 Brass assortment of 225 pieces.  30 sizes from 0.40mm to 6.00mm diameter pivot hole. Assortment includes 10 pieces each of B1 to B15 and 5 pieces each of B16 to B30. Made in Switzerland.

BERGEON BRONZE 100 PIECE BUSHINGS - SWISS MADE

Select the available Swiss Made Bergeon Bronze Bushing (BZS-part number) from the table below. Bushings are sold in packages of 100. Made in Switzerland.  

BERGEON BRASS 100 PIECE BUSHINGS - SWISS MADE

Select the available Swiss Made Bergeon Brass Bushing (BBS-part number) from the table below. Bushings are sold in packages of 100.

BERGEON SWISS CHAMFERING 10MM TOOL

Bergeon bushing tool replacement 10mm chamfering tool. Recommend that the chamfering tool be used with the Bergeon Bushing Tool or with Bergeon handle (SKU: Bergeon-Handle) only. Made in Switzerland.  

REAMER SET FOR KWM (FLUME) BUSHING TOOL

High quality genuine KWM German reamer set of 5 for American KWM System and German KWM sized bushings. Sizes included:  1.18mm (No. 1), 1.78mm (No. II), 2.69mm (No. III), 3.48mm (No. IV), and 5.85mm (No. V). Backside of reamers are rounded. Also,...

SCREW FOR BERGEON 6200 CUTTING REAMERS SWISS

  Set screw for Bergeon cutting reamers.  The set screw is used to secure the cutting reamer in the shaft.  The set screw fits the Bergeon 6200 Clock Bushing Tool.   Size: 3mm high x 3.85mm diameter.   Made in Switzerland.

PIVOT LOCATOR 9 3/4"L

Put pivots in proper locations and reposition wheels without dismantling movement. Length: 9 3/4" with handle.

HERMLE MOVEMENT 351-020 38CM

Hermle Model 351-020 is an eight day movement with 4-4 Westminster chime. Five hammers are mounted on the bottom of the movement. The pendulum length is 38cm. The German movement is New with Hermle warranty.

ORIGINAL BLACK FOREST DARK CAST TOP CUCKOO CLOCK WEIGHTS

Original Black Forest Cuckoo Weights with cast top (these are not wire top weights). Weights are dark in color with minimal to no colored paint. Price is per weight plus freight. Made in Germany.  

PENDULUM EYE HOOK FOR WOOD STICKS

Eye hook with textured rod for securing into a small wood pendulum stick. Overall length: 2 9/16"L.

PIVOT WIRE BLUE 12 PIECES ASSORTMENT 1.7MM - 2.81MM

All blue tempered steel pivot wire is 4 3/8"L. 12 piece assortment includes sizes 1.7mm (1), 2.15mm (5), 2.36mm (2), 2.46mm (1), 2.55mm (1), 2.76mm (1), and 2.81mm (1) diameters.  Sizes may vary slightly.  WARNING: This product may contain...

CUSTOM -MADE SOLID MAPLE BUSHING BOX

A custom-made box designed to hold many sizes of bushings. Made of beautiful solid MAPLE wood. Measures: 4 3/4" x 7 5/8" x 1". 60 holes in lid to help locate bushings. Bushings are not included. Bushing size labels supplied and can be attached or...