SYRINGE FOR FINE WORK

Fine tip syringe for fine gluing or other chemicals. 

SANTAPER HAND SANDER REPLACEMENT BELTS - SET OF 10

Replacement belts in various grit sizes for the Santaper hand sanders. These belts go on the tapered hand sander stick.  The sanding belts are 1/4" wide. Sold in a set of 10 of the same grit.  Available grit sizes:  120, 240, 320, 400, and...

SANTAPER YELLOW HAND SANDER STICK WITH FINE 400 GRIT BELT

Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4" wide sanding belt. The aluminum oxide belt is held in place by a patented spring-loaded mechanism that allows the belt to be...

CLOCK DIAL NUT SD STYLE FOR QUARTZ MOVEMENTS

Clock dial nut tightener screwdriver style for quartz movement center fixation mounting nut. Screwdriver style tool overall size: 5 7/8". Made in India by Anchor.

CLOCK DIAL NUT WRENCH KEY FOR QUARTZ MOVEMENTS - 4 SIZES

Clock dial wrench key for quartz movement center fixation mounting nut. The 4-prong key has different sizes 6mm (1/4"), 8mm (5/16"), 9mm (3/8"), and 12mm (1/2"). 4-prong tool overall size:  3" x 3". Made in India by Anchor.  WARNING: This...

WALLER SCRIBER REPLACEMENT CARBIDE TIP

Waller carbide replacment tip for Waller Scriber 52.950.  Made in India.

SANTAPER HAND SANDER KIT

Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4" wide sanding belt. The aluminum oxide belt is held in place by a patented spring-loaded mechanism that allows the belt to be...

JC FAMILY RING GUARDS YELLOW AND GOLD WITH BRIDGE SUPPORT

Ring guard adjusts to any size with no springs or wires to pinch or catch. Will not twist off during active use. Bridge provides strength. All sold in packs of one dozen. JC Family Ring Guard Assortment contains 6 white and 6 yellow. By Grobet.

UNIVERSAL BERGEON CROWN GAUGE - SWISS MADE

The Bergeon gauge is used to easily measure the stem thread, crown thread, crown tube, case tube/crowns, and band stops.  This tool is essential for repairing a watch crown. For measuring:Winding stem thread: dia. 0.6 - 1.2 mmCrown thread: dia. 0.6...

LEATHER HOLE PUNCH TOOL - 6 HOLES

Leather hole punch with six multi-hole sizes.  The working tip is a hollow steel cylinder with a sharp circular knife-like edge.  Smallest punch inside hole:  2.49mm I.D.  Largest punch inside hole:  4.33mm I.D.   Can...

WALLER SCRIBER WITH CARBIDE TIP

Waller carbide tipped scriber with reversible ends. Covered point may be covered while being carried.  Made in India. Handle:  4 3/8" long plus tip.

MASCOT DELUXE HOBBY MODELER TOOL SET

This deluxe kit contains some of the most useful and popular items: 3 knives, 20 blades, sander, miniature screwdriver, wedge, brushed aluminum miter box, razor saw blade, handle, and various other tools well suited for woodworking, model building and...

MASCOT THREE PRECISION KNIFE SET

Three fine quality knives in deluxe wooden case. The three precision hobby knives needed most often by hobbyists, craftsmen and artists; plus a vial of 10 assorted extra blades. Knives include: H1 lightweight hobby knife; H2 medium weight knife and H5...

MICRO TORCH WITHOUT BUTANE - HIGH QUALITY

Electronic, instant ignition torch requires only one hand to ignite and adjust the flame.  The easy thumb-adjustable gas flow lever allows precision flame corrections.  Uses 5 1/8 fl. oz. can butane fuel (not included).  Approximate burn...

WIRE AND SHEET GUILLOTINE CUTTER

Cutter supports cutting five wires simultaneously without pinching the ends. Cuts wire ranging from sizes 0.064 mm to 1.63 mm (.025" to .064")/AWG 22 to 14 Gauge.  The sheet cutting slot is 1 1/2" deep. Metal base plate size:  4 5/8" L x 2 7/8"...

COMPOUND ACTION STRAIGHT AND LEFT SNIPS

Tin snip features: Cuts left from tight curves to straight with red handles for quick identification Ground edges and serrations for cutting low carbon, cold-rolled 18 gauge steel Blade serrations spread cutting force across jaws improving cut quality...

TAP FOR GONG BASES 8MM MADE IN U.S.A.

Tap for gong bases.  Size:  8mm.  Can be used for screw tapping and screw repair.  Total length:  2 7/8".  Marked:  MBX1.25 HS D3 U.S.A.

ADJUSTABLE TAP WRENCH

Handheld adjustable tap wrench which can be used for screw tapping and screw repair.  Size:  7"L x 1"W x 1/2"D.

TOOL/PLIER STAND WOOD BLOCK

Made of polished high gloss hardwood, great bench aid.  Holes are beveled for easy in-out handling.  Holds up to four pliers or other two-handle tools.  Useful/affordable, keeps pliers/tools handy.  Holder only, does not include...

WIHA MAGNETIZER/DEMAGNETIZER

WIHA German made. Magnetize and demagnetize tools and parts inexpensively. Made with powerful industrial ceramic C8 magnets. No batteries required.

SLEEVE WRENCH 6-PRONG HIGH QUALITY VIGOR

Vigor high quality 6-prong sleeve wrench. Size: 1 3/4" diameter.

SANTAPER RED HAND SANDER STICK WITH EXTRA COARSE 120 GRIT BELT

Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4" wide sanding belt. The aluminum oxide belt is held in place by a patented spring-loaded mechanism that allows the belt to be...

SANTAPER BLUE HAND SANDER STICK WITH COARSE 240 GRIT BELT

Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4" wide sanding belt. The aluminum oxide belt is held in place by a patented spring-loaded mechanism that allows the belt to be...

SANTAPER BLACK HAND SANDER STICK WITH EXTRA FINE 600 GRIT BELT

Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4" wide sanding belt. The aluminum oxide belt is held in place by a patented spring-loaded mechanism that allows the belt to be...

SANTAPER GREEN HAND SANDER STICK WITH MEDIUM 320 GRIT BELT

Fast, easy, economical way to reach detailed, hard-to-reach areas. Plastic stick, tapered at the end, holds a replaceable 1/4" wide sanding belt. The aluminum oxide belt is held in place by a patented spring-loaded mechanism that allows the belt to be...

PRY-LIFT BARS SET OF 2

Set of 2 pry-lift bars. Select from 4", 5 1/2", 7 1/2" or 8" long.

OG CORD 100 FEET

Synthetic braid cord with maximum strength 100 pounds. 100 Feet. Has many purposes such as hanging clock tubes.

MOVEMENT PLATE SPREADER

Great bench tool which assists in slowly spreading the movement plates to assist in movement restoration. Size: 5"L x 2 1/2"W.  Includes bolts and wing nuts.

BUBBLE LEVELS

Bubble levels. Sold individually or in a package of 12.

BENCH KNIFE

Bench knife with steel blade. Securely mounted in hardwood handle. Overall length: X". Blade length: x".