SCREW HEAD FILES FIRST QUALITY

Used for cleaning and enlarging slot in the head of screws. The higher the cut number, the finer the cut. "0" cut is course, "6" cut is fine. Measures: 3"L X 11/32"W X 1/15"T. First Quality File SWISS Made.

FILE ROUND PARL 8" x 3/8" CUT 2

Round 3/8" diameter. Measures 8" Long with Cut 2 coarse. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. First Quality File SWISS Made.

FILE ROUND PARL 6" x 3/32" CUT 4

Round 3/32" diameter. Measures 6" Long with Cut 4 coarse. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. First Quality File SWISS Made.

FILE ROUND TAPER 5 1/2" CUT 0 FIRST QUALITY

Tapered to produce a fine point and double cut. File may be used to the end of the point. Round file suitable for narrow work. Measures 5 1/2" Long. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. First Quality File...

FILE ROUND 4 1/2" CUT 0 FIRST QUALITY

Round tapered to the point. Measures: 4 1/2"L with Cut 0. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. First Quality File SWISS Made.

FILE PILLAR REGULAR 8" CUT 0 FIRST QUALITY

Round tapered to the point. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. Measures: 8"L with Cut 0. "0" cut is coarse, "6" cut is fine. First Quality File SWISS Made.

FILE PILLAR NARROW 8" FIRST QUALITY

Pillar files are rectangular cross cut files. They're thicker (relative to their width) than other flat files and have a cut surface only on top and bottom (not sides). They taper in thickness (thicker at tang and thinner at end). The higher the cut...

HAND FILES FIRST QUALITY

Parallel in both width and thickness. Double cut on both top and bottom. One edge is single cut and one edge is safe. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. Measures: 6"L X 3/4"W X 5/32"T. First Quality...

HALF-ROUND RING FILES FIRST QUALITY

Tapered in both width and thickness to the point. Double cut on both flat and round sides. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. Measures: 6"L. First Quality File SWISS Made.

REGULAR HALF-ROUND FILES FIRST QUALITY

Tapered in both width and thickness to the point. Double cut on both flat and round sides. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. Measures: 6"L X 1/2"W X 9/64"T. First Quality File SWISS Made.

BARRETTE FILES FIRST QUALITY

Tapered in both width and thickness to a fine point. Double cut on wide flat side only. Narrow side and beveled surface is uncut. The higher the cut number, the finer the cut. "0" cut is coarse, "6" cut is fine. Measures: 6"L X 21/32"W X 5/32"T. ...