SUSPENSION SCREW FOR HERMLE

Suspension screw for Hermle clocks. Sold individually.

SUSPENSION SPRING .93"L

Suspension spring 23.5mm (.93")L x 10mm (.4")W.  Spring steel 1/8"L.  Pin hole to op:  16.5mm (. 65")L. No pin.

SUSPENSION SPRING 1 3/4"L WITH SPRING STRENGTH 0.12"

Suspension spring 1 3/4"L x 3/8"W.  Spring steel 9/16"L.  Spring steel thickness:  0.12".  Pin on one end.  Suspension spring for wall clocks and others.

VERGE BRIDGE 22MM

Hermle verge low bridge 22mm suspension spring post.  Low bridge for front pendulum type only. Overall length from slot post tip to back of bridge:  22mm L.  WARNING: This product may...

VERGE LOW BRIDGE SUSPENSION POST 24MM

Hermle verge low bridge 24mm (suspension bridge). Overall length from slot post tip to back of bridge:  24mm L. Back of bridge to post hole:  20mm L. Slot 10mm L.  WARNING: This...

VERGE LOW BRIDGE SUSPENSION POST 27MM

Hermle verge low bridge 27mm (suspension bridge). Overall length from slot post tip to back of bridge:  27mm L. Back of bridge to post hole:  21.4mm L.  WARNING: This product may...

WEIGHT CORE INSERT 2,000 GRAMS (4.4 LB.) FITS 40MM (1.57") SHELLS

Weight core insert 2,000 grams (4.4 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook and nib, not included.  Weight core is not drilled through and therefore does not...

WEIGHT CORE INSERT 2,700 GRAMS (6 LB.) FITS 47MM (1 27/32") SHELLS

Weight core insert 2,700 grams (6 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook and nib, not included.  Weight core is not drilled through and therefore does not require...

WEIGHT CORE INSERT 2400 GRAMS (5.4 LB.) FITS 60MM (2 3/8") SHELLS

Formed cast weight core insert 2400 grams (5.4 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook and nib, not included.  Weight core is not drilled through and therefore...

WEIGHT CORE INSERT 3300 GRAMS (7.2 LB.) FITS 60MM (2 3/8") SHELLS

Weight core insert 3300 grams (7.2 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook and nib, not included.  Weight core is not drilled through and therefore does not...

WEIGHT CORE INSERT 3400 GRAMS (7.6 LB.) FITS 60MM (2 3/8") SHELLS

Weight core insert 3400 grams (7.6 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook and nib, not included.  Weight core is not drilled through and therefore does not...

WEIGHT EXTENSION PIECE FOR HERMLE WEIGHT CORES

Weight extension screws into the weight core allowing the weight screw hook to connect to a shorter weight inside the shell. The extension fits inside the weight shell under the top cap and screws...

WEIGHT SHELL 60 X 278MM SOLID BRASS - GERMAN

Single Hermle polished solid brass weight shell.  The weight shells are used on the Hermle chain/cable 1171-050 and 1171-850 movements as well as the 1171-890 cable tubular bell movement. ...

WEIGHT SHELL COMPLETE ASSEMBLY 2,000 GRAMS SET OF 2 FOR HERMLE 241

Set of 2 weight assemblies (40 x 235mm) for Hermle 241 chain movements. Includes: Two weight core inserts 2,000 grams (4.4 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook...

WEIGHT SHELL COMPLETE ASSEMBLY 2,000 GRAMS SINGLE FOR HERMLE 241

Single weight assembly (40 x 235mm) for Hermle 241 chain movements. Includes: Weight core insert 2,000 grams (4.4 lb.).  Internally threaded on both ends (~19mm deep) for 5mm hook and nib,...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 BRUSHED BRASS FOR HERMLE 1151-050 LARGE BOB

Genuine Hermle German-made solid brass polished set of 3 weight assemblies (40 x 264mm).  For Hermle 1151-050 and 1151-053 chain movements that utilize a lyre pendulum with a LARGE bob greater...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 1161 CABLE WITH LYRE PENDULUM

Set of 3 weight assemblies (60 x 245mm) for Hermle 1161-850 and 1161-853 cable movements that utilize a lyre pendulum with 8.5" or 10.5" bob.  Polished brass finish weight shells (anodized...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 1161 CABLE WITH SMALL BOB

Set of 3 weight assemblies (60 x 245mm) for Hermle 1161-850 and 1161-853 cable movements that utilize a small pendulum bob of 6.5" diameter or less.  Polished brass finish weight shells...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 1161 CHAIN

Set of 3 weight assemblies (60 x 245mm) for Hermle 1161-050 and -053 chain movements.  Polished brass finish weight shells (anodized aluminum). Includes: Three weight core inserts: one at 3,500...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 451 WITH 85CM WOOD STICK

Set of 3 weight assemblies (47 x 272mm) for Hermle 451-85CM chain movements that utilize a wood stick pendulum and 6.5" or 8.5" bob.  Polished brass finish (anodized aluminum) weight shells...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 451 WITH LYRE PENDULUM

Set of 3 weight assemblies (47 x 272mm) for Hermle 451 chain movements that utilize a lyre pendulum with 8.5" or 10.5" diameter bob.  Polished brass finish (anodized aluminum) weight shells...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 461 CABLE WITH LYRE PENDULUM

Set of 3 weight assemblies (60 x 245mm) for Hermle 461-853 cable movements that utilize a lyre pendulum with 8.5" or 10.5" bob.  Polished brass finish weight shells (anodized aluminum)...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 461 CABLE WITH SMALL BOB

Set of 3 weight assemblies (60 x 245mm) for Hermle 461-853 cable movements that utilize a 6.5" or smaller diameter bob.  Polished brass finish weight shells (anodized aluminum). Includes: Three...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR HERMLE 461 CHAIN

Set of 3 weight assemblies (60 x 245mm) for Hermle 461-050 or 461-053 chain movements.  Polished brass finish weight shells (anodized aluminum). Includes: Three weight core inserts: one at...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 GOLD FINISH FOR KIENINGER SKS WITH 85CM WOOD STICK

Set of 3 weight assemblies (47 x 272mm) for Kieninger SKS chain movements that utilize a wood stick pendulum and 6.5" or 8.5" bob.  Polished brass finish (anodized aluminum) weight shells...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 SOLID BRASS FOR HERMLE 1151-050 SM BOB

Genuine Hermle German-made solid brass polished set of 3 weight assemblies (40 x 264mm).  For Hermle 1151-050 and 1151-053 chain movements that utilize a lyre pendulum with a SMALL 6 1/2"...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 SOLID BRASS FOR HERMLE 1161-853 CABLE WITH LYRE PENDULUM

Genuine Hermle German-made solid brass polished set of 3 weight assemblies (60 x 245mm).  For Hermle 1161-850 and 1161-853 cable movements that utilize a lyre pendulum with 8.5" or 10.5" bob...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 SOLID BRASS FOR HERMLE 1161-853 WITH SM BOB

Genuine Hermle German-made solid brass polished set of 3 weight assemblies (60 x 245mm).  For Hermle 1161-850 and 1161-853 cable movements that utilize a small 6.5" or less diameter bob...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 SOLID BRASS FOR HERMLE 1171

Set of 3 weight assemblies (60 x 278mm) for Hermle 1171-050 and 1171-850 cable movements that utilize a lyre pendulum with 8.5" or 10.5" bob.  Solid brass polished weight shells...

WEIGHT SHELL COMPLETE ASSEMBLY SET OF 3 SOLID BRASS FOR HERMLE 451 WITH A WOOD STICK PENDULUM

Genuine Hermle German-made high quality solid brass polished set of 3 weight assemblies (50 x 232mm).   For Hermle 451 chain movements that utilize a wood stick pendulum with 6.5" or...